Wednesday, May 16, 2012

PCB STEPS

1    Why inert gas is used in incandescent bulb? How does incandescent bulb works? Why tungsten is used in incandescent bulb?

Light bulbs have a very simple structure. At the base, they have two metal contacts, which connect to the ends of an electrical circuit. The metal contacts are attached to two stiff wires, which are attached to a thin metal filament. The filament sits in the middle of the bulb, held up by a glass mount. The wires and the filament are housed in a glass bulb, which is filled with an inert gas, such as argon.      When the bulb is hooked up to a power supply, an electric current flows from one contact to the other, through the wires and the filament. Electric current in a solid conductor is the mass movement of free electrons (electrons that are not tightly bound to an atom) from a negatively charged area to a positively charged area.
As the electrons zip along through the filament, they are constantly bumping into the atoms that make up the filament. The energy of each impact vibrates an atom -- in other words, the current heats the atoms up. A thinner conductor heats up more easily than a thicker conductor because it is more resistant to the movement of electrons.
      Bound electrons in the vibrating atoms may be boosted temporarily to a higher energy level. When they fall back to their normal levels, the electrons release the extra energy in the form of photons. Metal atoms release mostly infrared light photons, which are invisible to the human eye. But if they are heated to a high enough level -- around 4,000 degrees Fahrenheit (2,200 degrees C) in the case of a light bulb -- they will emit a good deal of visible light.
      The filament in a light bulb is made of a long, incredibly thin length of tungsten metal. In a typical 60-watt bulb, the tungsten filament is about 6.5 feet (2 meters) long but only one-hundredth of an inch thick. The tungsten is arranged in a double coil in order to fit it all in a small space. That is, the filament is wound up to make one coil, and then this coil is wound to make a larger coil. In a 60-watt bulb, the coil is less than an inch long.
      Tungsten is used in nearly all incandescent light bulbs because it is an ideal filament material. we'll find out why this is, and we'll examine the role of the glass bulb and inert gas.
      a metal must be heated to extreme temperatures before it will emit a useful amount of visible light. Most metals will actually melt before reaching such extreme temperatures -- the vibration will break apart the rigid structural bonds between the atoms so that the material becomes a liquid. Light bulbs are manufactured with tungsten filaments because tungsten has an abnormally high melting temperature.
      But tungsten will catch on fire at such high temperatures, if the conditions are right. Combustion is caused by a reaction between two chemicals, which is set off when one of the chemicals has reached its ignition temperature. On Earth, combustion is usually a reaction between oxygen in the atmosphere and some heated material, but other combinations of chemicals will combust as well.
      The filament in a light bulb is housed in a sealed, oxygen-free chamber to prevent combustion. In the first light bulbs, all the air was sucked out of the bulb to create a near vacuum -- an area with no matter in it. Since there wasn't any gaseous matter present (or hardly any), the material could not combust.
      The problem with this approach was the evaporation of the tungsten atoms. At such extreme temperatures, the occasional tungsten atom vibrates enough to detach from the atoms around it and flies into the air. In a vacuum bulb, free tungsten atoms shoot out in a straight line and collect on the inside of the glass. As more and more atoms evaporate, the filament starts to disintegrate, and the glass starts to get darker. This reduces the life of the bulb considerably.
      In a modern light bulb, inert gases, typically argon, greatly reduce this loss of tungsten. When a tungsten atom evaporates, chances are it will collide with an argon atom and bounce right back toward the filament, where it will rejoin the solid structure. Since inert gases normally don't react with other elements, there is no chance of the elements combining in a combustion reaction.
      Cheap, effective and easy-to-use, the light bulb has proved a monstrous success. It is still the most popular method of bringing light indoors and extending the day after sundown. But by all indications, it will eventually give way to more advanced technologies, because it isn't very efficient.
Incandescent light bulbs give off most of their energy in the form of heat-carrying infrared light photons -- only about 10 percent of the light produced is in the visible spectrum. This wastes a lot of electricity. Cool light sources, such as fluorescent lamps and LEDs, don't waste a lot of energy generating heat -- they give off mostly visible light. For this reason, they are slowly edging out the old reliable light bulb.
            
2    To read about black body radiation



3    How CFL works?
             
      CFL (Compact Fluorescent Lamp) converts electrical energy to radiant energy. They are energy efficient and use better technology as compared to conventional tube lights and bulbs. It has two components:
a)      A glass tube filled with argon and mercury vapor & coated with a layer of fluorescent material.
b)      An electronic ballast circuit.
      CFLs contain argon and mercury vapor housed within a spiral-shaped tube. They also have an integrated ballast, which produces an electric current to pass through the vaporous mixture, exciting the gas molecules. In older CFLs, it took several seconds for the ballast to produce enough electricity to ramp up the excitation. Newer CFLs have more efficient ballasts and require a shorter warm-up. Either way, when the gas gets excited, it produces ultraviolet light. The ultraviolet light, in turn, stimulates a fluorescent coating painted on the inside of the tube. As this coating absorbs energy, it emits visible light.


3    What is meant by non ionizing radiation?
      Non-ionizing (or non-ionising) radiation refers to any type of electromagnetic radiation that does not carry enough energy per quantum to ionize atoms or molecules—that is, to completely remove an electron from an atom or molecule. Instead of producing charged ions when passing through matter, the electromagnetic radiation has sufficient energy only for excitation, the movement of an electron to a higher energy state. Nevertheless, different biological effects are observed for different types of non-ionizing radiation







      Electromagnetic radiation, the photons of which lack the energy required to ionize atoms or induce ion formation; NIR includes sound, ultraviolet, visible, and infrared light, microwaves, and radiowaves. Cf Ionizing radiation.

4    Which are the types of UV lights? Where all we use UV light?
      There are three types in UV Lights, 1) UV-C, 2)UV-B, 3)UV-A
       1) UVC - shortwave UV, which includes germicidal ultraviolet at 253.7nm wavelength - is used for air, surface and water disinfection. Unintentional overexposure to UV-C causes skin redness and eye irritation, but does not cause skin cancer or cataracts.
       2) UV-B - A small, but dangerous part of sunlight. Most solar UV-B is absorbed by the ozone layer. Prolonged exposure causes sun burn and could result in unhealthy effects on the skin and eyes.
       3) UV-A - Long wave UV causes premature skin aging.
   

9    To read about absorption spectra, emission spectra, hydrogen spectra, EPROM..


10    Difference between dose and intensity

11    Probability calculation in PCB

12    Transistor specifications

No comments:

Post a Comment