1 What is linear junction and abrupt junction?
2 Annealing
More Information.
http://c2.com/cgi/wiki?KnowledgeAnnealing
3 What is the state of silicon at 0K and at 60K?
4 To read about SP^3 orbitals
abrupt junction
A PN junction
is the juxtaposition of a n-type and a p-type piece of semiconductor,
taken originally from the same block of crystal. The difference between
the densities of donors and acceptors ND - NA
undergoes a very sharp variation from a negative value in the P region
to a positive value in the N region. An abrupt junction is by definition
a junction in which the doping type changes over a very small distance
compared to the spatial extent of the depletion region (see below.)
Figure EC1 : Donor and acceptor density profiles in an abrupt PN junction
There are some other types of junctions
(exponential, linear junctions...). However we will only focus here on
the abrupt junction, because results are much simpler and can be easily
generalized to more complex cases.
Figure EC2 : Diagram showing the electronic bonds in an abrupt P-N
junction of Si. Here N-doping is achieved with arsenic (As) atoms and
P-doping with boron (B) atoms
Figure EC2 enables understanding what
happens when a N-type semiconductor is in contact with a P-type
semiconductor. The electrons, abundant in the N-type region, will cross
the junction in order to recombine with holes present in the P-type
region. Therefore, a negative static space charge builds up in the P
region (the trivalent boron atoms have a static negative charge since
they release a positively-charged hole in the valence band) whereas a
positive space charge builds up in the N-type zone for the same reasons.
The small volume in which this space charge is created is called the space
charge zone or depletion zone.
Because there is a strong electric field in this area, the density of
free carriers is negligible at thermal equilibrium. In addition, the
frontier between the depletion zone and the neutral parts of the
junction is very sharp.
Figure EC3 : P-N junction at thermal equilibrium
Just after the P- and N-type semiconductors
have been drawn closer, a potential barrier appears for both holes an
electrons. Indeed, the static space charges accumulated at the borders
of the junction (positive charges in the N zone, negative charges in the
P zone) create an electric field pointing from N towards P, which
prevents diffusion and further recombination of electrons and holes:
diffusion is then rapidly stopped by the buildup of this internal
electric field. In addition, because of the existence of this double
layer of charges on both sides of the junction, the electrostatic
potential varies sharply inside the depletion zone and the potential
difference Vd, called the diffusion
potential (or built-in potential) reaches non-negligible values (e.g.
0.8V for Si). However, if we attempt to measure a voltage by connecting a
multimeter at both sides of the PN diode, we will find a zero voltage
drop, because a multimeter measures a difference in electrochemical
potentials, not just electrostatic potentials. Indeed, here the
electrochemical potential is constant throughout the crystal, including
in the space charge zone, because this potential takes into account not
only the electric field but also the concentration gradient of charge
carriers. The diffusion potential due to this gradient compensates
exactly for the electrostatic potential.
The relationship between the space p[C X cm^-3]
charge density , the electric field
E
and the electrostatic potential
is :
Where
is the permittivity of the medium (10‑10 F/m for silicon).
The (chemical) potential of a semiconductor being equal to its Fermi energy, the built-in potential or diffusion potential is proportional to the difference of the Fermi energies of the two unbounded semiconductors :
When the junction meets thermal equilibrium,
the Fermi energy has a constant value throughout the whole device. The
energies of conduction and valence bands are therefore shifted up or
down, and exhibit a smooth variation across the depletion region. As a
consequence, there is an electrostatic potential energy difference
appearing between the P and N region, equal to qVd.
More Information.
1) http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&sqi=2&ved=0CFsQFjAB&url=http%3A%2F%2Fwww.ifm.liu.se%2Fcourses%2Ftfyy77%2FCourse%2520Note%2520L3_p-n%2520junction.pdf&ei=AU2zT7GtKsTorAe9urnkAw&usg=AFQjCNGNscC51kPWIQV_HyCV4ffIDHLd1w&sig2=ezcgz5vN36iOfBdeSUDQ9Q
2) http://ecee.colorado.edu/~bart/book/book/chapter4/ch4_2.htm
A pn junction in which the concentration of impurities changes suddenly from acceptors to donors, this is called abrupt junction.
linear junction
2 Annealing
Heating steel to, and
holding at a suitable temperature, followed by relatively slow cooling.
The purpose of annealing may be to remove stresses, to soften the steel,
to improve machinability, to improve cold working properties, to obtain
a desired structure. The annealing process usually involves allowing
the steel to cool slowly in the furnace.
More Information.
http://c2.com/cgi/wiki?KnowledgeAnnealing
3 What is the state of silicon at 0K and at 60K?
4 To read about SP^3 orbitals
No comments:
Post a Comment